Sub miniature push-on (snap-on) connector, operating in the range DC-40 GHz
50 ohms / part series R222 (AEP 75XX)
SMP connectors were introduced in the 2000s for high frequency blind mate applications and is standardized according to MIL-STD-348A fig. 326. A cost effective version SMP-COM (part series R222 9) is also available for telecom applications up to 12 GHz.
Performance :
- Impedance : 50Ω
- Frequency range : DC ~ 40 GHz (SMP-COM : DC ~ 12.4 GHz)
- Durability :
- Full detent : 100 mating cycles
- Limited detent : 500 mating cycles
- Full detent : 1 000 mating cycles
- Power rating at 1 GHz : 100W
- Temperature range : -65°C / +165°C
- Radial misalignment : +/-0.25mm
- Axial misalignment : 0/+0.25mm (with fixed length adapters)
- The use of spring loaded adapters enables larger axial tolerance.
Dimensions:
- The outer diameter of the interface is approx 3.30mm
Specific for non magnetic P/Ns:
- Products are guaranteed that relative distortion of a magnetic field of 1.5T, generated by a non-magnetic connector, is less than 5 * 10-7 (0,5 ppm) at a distance of 10 mm from the surface of the connector