Screw-on miniature connector, operating at low frequency DC-5 MHz
RTX connectors are designed to be used with digital data bus defined by MIL-STD-1553 B standard, in digital avionic equipment.
RTX interface complies to AECMA EN3716 standard.
RTX connectors are designed to be used with digital data bus defined by MIL-STD-1553 B standard, in digital avionic equipment.
RTX interface complies to AECMA EN3716 standard.
Dedicated to military applications such as missiles, tanks and helicopters, RTX connectors are designed to be used with digital data bus defined by MIL-STD-1553 B, which is commonly considered as a worldwide standard regarding digital avionic equipment. Conforming to AECMA EN3716 standard, RTX connectors offer:
- Space and weight savings through the implementation of local networks.
- User friendly and time saving features during the installation.
- Several configurations according to your needs due to the possibility to mix and match plugs and receptacles with either male or female contacts.
Electrical Performance
- Frequency range: 5 MHz max
- Insulation resistance: at 25°C (77°F) ≥ 5000 MΩ ; at 150°C (302°F) ≥ 1000 MΩ
- Dielectric Withstanding Voltage: at sea level: 900 Vac RMS – 50 Hz ; at 70000 feet: 200 Vac RMS – 50 Hz
- Contact resistance: center and intermediate contacts ≤35 mΩ ; outer body ≤8 mΩ
Mechanical Performance:
- Shock: 100g – 6 ms
- Vibration: AECMA EN2591 test D3 – method B
- Mating & unmating: 500 cycles
- Contact retention: > 45 N
- Locking torque (C)
- Mating : 1 ≤ C ≤ 1.25 N.m (8.85 ≤ C ≤ 11 Lb.inch)
- Unmating: C ≤ 1.35 N.m (11.95 Lb.inch)
Environmental Performance:
- Temperature range: -65°C (-149°F) to +150°C (+302°F)
- Temperature life: 1000 hours at 150°C (+302°F)
- Salt spray: 96 hours
- Altitude immersion: 47 kPa (.68 psi)
- Air leakage: 0.5 cm3 /s
- Sand and dust: 1 cycle – wind speed 3.5±0.5m/s
- Humidity: 28 days